GSENS2

GSENS2

Provides highly accurate information about the abnormalities in the oil and to ensure the best health condition in transformers.

Key Features

  • Provides the ability to identify fault type
  • Detection of potential failures before any fault occurs
  • Prolongation of service intervals and with this, enhancement of working hours
  • No calibration required
  • Early indication of incipient faults
  • Establish baseline data for evaluation

Maintenance of Transformer has evolved over the years from a necessary item of expenditure to a strategic tool in the management of electrical transmission and distribution networks.

Determination of fault gases, moisture in oil and oil temperature of transformer insulating oil in the gas- concentration is very important. By accurately monitoring the condition of the oil, any sudden faults can be identified, and outages can potentially be avoided. Leading to an efficient approach to maintenance and the optimum intervals can be determined for replacement.

We at Rugged Monitoring are motivated to provide innovative and exceptional quality products, our vision remains focused on meeting customer requirements while anticipating and exceeding the needs of a continuously changing dynamic market.

Power Transformers

  • Extended transformer life
  • Minimize the need for internal inspections
  • Simple and quick installation
  • Less maintenance
  • Mitigate the Risk and Potential for any catastrophic failures
  • Easy to mount on the operating transformer without any operational interruption
  • Advanced software with intuitive operation
TECHNICAL SPECIFICATIONS
Supply voltage
24 V DC
Power consumption
15 W
Mounting
On DIN rail
Ambient conditions during operation
Ambient temperature for horizontal installation position: –25...+70 °C Relative operating humidity: 10...95 % non-condensing Air pressure and altitude: up to 2,000 m above sea level
Contamination level
2
TECHNICAL DATA
Protection Class
II
Degree of protection
IP 20
Mounting Orientation
Horizontal
Ambient conditions for transport storage
Temperature: –40...+85 °C Relative humidity: 10 % to 95 % non-condensing Air pressure: corresponds to 4,500 m above sea level
Dimensions and weight
Please refer the diagram for Dimensions Weight: approx. 0.8 kg
CHARACTERISTIC DATA
Communication
Ethernet with 3 Ports, 2 separate networks: 2 x RJ45 (for protocol converter parameterization) 1 x RJ45 (for SCADA)
Protocols
DNP 3.0 via Ethernet; Modbus TCP; IEC 61850-8-1 MMS (optional)
OPTIONS
Wide range power supply unit
Input / 100...240 V AC 50/60 Hz ( ± 10 %) 110...300 V DC (-20...+25 %) Output 24 V DC / 80 W Temperature range -25...+70 °C Degree of protection IP 20 Dimensions W x H x D 32 x 124 x 102 mm

BROCHURE

Documents sorted by newest first

CONTACT YOUR LOCAL SALES REPRESENTATIVE